Key features of the EUREKA Controller
Connects your camera, robot and PLC
Cameras, robots and PLCs are integrated and calibrated through one controller.
No-code software, pre-installed
Set up and adjust applications with drag and drop, without writing code.
Works with YAMAHA, DENSO and other major robot brands
Use the controller with the robots already on your line.
Built for robot vision and bin picking
Pre-installed software with visual programming
The programming and vision software runs on the controller. Applications are built by connecting function blocks with drag and drop, without writing code.Pre-trained AI models and on-site training
Pre-loaded models detect, inspect and locate most parts without new training. New parts can be trained on the controller with or without CAD data.Your data stays on site
Programs and AI models are stored on the controller and belong to your team.High-accuracy calibration
Cameras, robots and end effectors are calibrated together for end-to-end picking reliability in vision guided tasks. Works with standard 2D cameras and the EUREKA 3D Camera.Real-time motion planning
Collision-free robot paths are generated in under one second and adapt to changes without manual re-teaching.Works with YAMAHA, DENSO and other major robot brands
It also supports FANUC, ABB, Yaskawa, Universal Robots, Mitsubishi Electric, Omron and others, so it can be added to robots already in use on your line.EUREKA Controller in a bin picking application
Eureka Robotics shows the EUREKA AI Vision System picking metal parts from a bin.
EUREKA Controller specifications
| Model | ECO-ESS-3001 | ECO-ADV-3002 |
|---|---|---|
| Input voltage | 12–48 V DC* | |
| Power consumption | 50–80 W (typical), 230 W (max.) | |
| Communication protocols | Modbus TCP, Modbus RTU, EtherNet/IP | |
| Dimensions (W × D × H) | 260 × 180 × 300 mm (260 × 250 × 325 mm with antennas) | |
| Weight | 5.9 kg | |
| Ambient temperature | 0 to 60 °C | |
*A 100–240 V AC adapter is also available.
We support your project
We work with you from the first review of your application to training your team. We also supply YAMAHA and DENSO robots, so we can propose the controller, the vision system and the robot as one solution.
Requirement Review
We review your application requirements, your parts and your target cycle time.
Configuration Proposal
We propose a configuration of controller, camera, robot and gripper for your application.
Simulation and Sample Testing
If you send us CAD data of your parts, we can run a detailed simulation of the pick points. We can also test your sample parts on our own demo system.
Remote Training Support
Together with Eureka Robotics, we provide remote training support for your team.
Your contact person
Alexander Lenzen
North-East Germany, International
Your contact person
Heiko Bulik
South Germany and Switzerland