Hohsen Coin Cell Parts are designed for battery R&D and laboratory applications. Seika Sangyo GmbH is the official European distributor of Hohsen in Europe, supplying high-quality coin cell cases, caps, spacers, wave washers and gaskets for research institutes, universities and industrial laboratories.
| Category | Description |
|---|---|
| 2032 Coin Cell Parts | Cap/SUS316L, Case/SUS316L, Gasket/PP |
| Coin Cell Spacer | 16mmDia × 1.0mmT/0.5mmT/0.3mmT /SUS316L |
| Coin Cell Wave Spring | 15mmDia × 1.4mmH/ SUS316L |
| 2032 Coin Cell Parts with Al CVD (NEW!) | Cap/SUS316L, Case/SUS316L with Al CVD (Deposited), Gasket/PP |
| Category | Description |
|---|---|
 HS-Flat Cell |
The HS-Flat Cell is an ideal model cell to simulate coin cells using O-rings and a spring with reproducibility. Easy to assemble or disassemble with four butterfly nuts. |
HS-3E Cell |
Keeping the same structure of HS Flat Cell, a reference electrode is inserted to measure a single potential. |
KP-Solid Cell |
By enclosing the measurement sample in this jig under an inert gas such as a glove box, it is possible to measure the electrical characteristics in an environment where the air is shut off. |
| Category | Description |
|---|---|
| Coin Cell Parts | 2016, 2025, 2032, etc. |
| Coin Cell Parts with special materials | Al-deposited, Al-made, Heat resistant material, Rare metal, etc. |
| Cylindrical cell 18650, 21700 kit | Case, Cap, with safety vent, Gasket |
| Pouch film for Pouch cell | |
| Sealant tab for Pouch cell |
| Category | Description |
|---|---|
| Coated Electrode for LiB | One / Two -side Coated, Positive/Negative Electrode, etc. |
| Foil | Al-foil, Cu-foil, Lithium Foil, etc. |
Your contact person
