DENSO Robotics builds compact articulated and collaborative robots for assembly, pick and place, machine tending and inspection. DENSO is one of the world’s two largest automotive suppliers and uses more than 21,500 of its own robots in its own production, with around 130,000 installed worldwide.
Seika Sangyo supplies the DENSO articulated range — VP, VS, VS-6, VM, VMB and VLA — together with the COBOTTA and COBOTTA PRO collaborative robots. The articulated models share the RC8A controller, so programming and integration stay consistent across sizes and payload classes.
Compact footprints, low maintenance and protection classes for dusty, damp and cleanroom environments make these robots suitable for automotive, electronics, plastics, pharmaceutical and medical production.
Proven in DENSO’s own productionDENSO is the world’s largest user of small assembly robots, with more than 21,500 running in its own plants. Robots are tested against the requirements of DENSO’s own production lines. |
One controller across the core rangeThe VP, VS, VS-6 and VM series all run on the RC8A controller, so one set of skills covers all four series. VMB, VLA and the COBOTTA robots use their own controllers. |
Compact footprintDENSO designs for tight installations, with compact arm bodies and a 10.6 litre controller. Cells stay smaller and existing lines can be automated without rebuilding the layout. |
Options for demanding environmentsStandard models extend to IP65 dust and splash proof, cleanroom and bellows types. The VS-050S2 is a dedicated pharmaceutical and medical model. |
Offline programming with WINCAPSDENSO offers 3D offline programming through WINCAPS. Programs can be built and checked away from the line, which shortens system launch. |
Certified safety monitoringThe RC8A Safety Motion version is TÜV Rheinland certified to EN ISO 13849-1, performance level d / SIL 2. It monitors speed and stop position, which can reduce or remove safety fencing. |
Not sure which series fits? Selection depends on the payload, the working area and whether the robot works inside a guarded cell or alongside operators. Find the matching DENSO series below, or tell us about your application.
| Compact | |
| VP-5243 / 6242 | 5- and 6-axis robots for confined spaces and small parts assembly. Reach 430 to 432 mm, payload 2.5 to 3.0 kg. |
| VS Series | 5- and 6-axis robots for assembly, pick and place and inspection. Reach 505 to 905 mm, payload up to 7.0 kg. |
| Standard | |
| VS-6556 / 6577 | 6-axis robots with extended reach for assembly and packaging. Reach 653 to 854 mm, payload 7.0 kg. |
| VM-6083 / 60B1 | 6-axis robots for machine tending and transportation. Reach 1,021 to 1,298 mm, payload 13.0 kg. |
| Large payload and reach | |
| VMB-2515 / 2518 | 6-axis robots for packaging, palletizing and material handling. Reach 1,506 to 1,804 mm, payload 25 kg. |
| VLA-4025 / 6022 | The largest DENSO robots, for palletizing, depalletizing and transportation. 40 kg at 2,503 mm reach, or 60 kg at 2,257 mm. Formerly sold as VL-2500. |
| Collaborative | |
| COBOTTA | Compact collaborative robot for laboratory automation and small parts handling. Arm length 342.5 mm, payload 0.5 kg. |
| COBOTTA PRO 900 / 1300 | Collaborative robots for machine tending and assembly alongside operators. Arm length 908 to 1,303 mm, payload 6 to 12 kg. |
| Pharmaceutical and medical | |
| VS-050S2 | Dedicated 6-axis model for sterile filling and medical device production. Reach 520 mm, payload 4.0 kg. |
Some applications are better served by a SCARA than by an articulated arm. Seika supplies the YAMAHA range as well, which covers SCARA, Cartesian and single-axis robots and linear transport, so the comparison can be made before the specification is fixed. Tell us about your application and we will suggest the right one.
DENSO robots are used across a wide range of production environments in Europe, from automotive component lines to cleanroom assembly.
Automotive componentsAssembly, part insertion and inspection of sensors, connectors and small mechanical parts at tier suppliers. DENSO develops its robots for this environment in its own plants. |
Electronics assemblyBoard handling, component placement and inline inspection where cycle time and repeatability matter. |
Pharmaceutical and medicalSterile filling, laboratory automation and medical device production in controlled environments. |
||
Packaging and palletizingCarton filling, tray loading and palletizing at the end of the line, with reach and payload for full cases. |
Machine tendingLoading and unloading CNC machines, presses and inspection stations, running unattended between shifts. VM · VMB · COBOTTA PRO |
Laboratory automationSample handling, pipetting support and instrument loading where the robot shares the bench with operators. |
Cleanroom specifications are available on several series, along with IP65 dust and splash proof and bellows types. The VS-050S2 is a dedicated model for pharmaceutical and medical production. Available options differ per series, so contact us with the environment you are working in.
The VLA-6022 handles up to 60 kg at 2,257 mm reach. The VLA-4025 handles 40 kg at a longer 2,503 mm reach. Both were formerly sold as the VL-2500.
Ethernet, RS-232C and USB are standard. CC-Link, DeviceNet, EtherCAT, EtherNet/IP, PROFIBUS, PROFINET and parallel discrete I/O are available as options. The ORiN interface allows the controller to communicate with a wide range of external devices. Tell us which control system the robot has to sit in and we will confirm the interface before the order.
Yes, as an option. The RC8A Safety Motion specification is ordered separately from the standard controller and is certified by TÜV Rheinland to EN ISO 13849-1 at performance level d / SIL 2. It monitors motion space, speed and stop position, which allows a smaller robot operating area and more compact cells. Whether fencing can be reduced depends on the risk assessment for the cell, and we can go through that with you before the specification is fixed.
Yes. A DENSO VS-6 running bin picking with the Eureka AI vision system is set up in our Düsseldorf showroom. Contact us to arrange a visit, or send us your parts and we will test them.
An articulated robot runs at full speed inside a guarded cell and is chosen for cycle time and payload. A collaborative robot is designed to work next to an operator without fencing, at lower speed. DENSO covers both, with the VP to VLA range on one side and COBOTTA and COBOTTA PRO on the other.
Seika Sangyo GmbH supplies DENSO industrial robots from Düsseldorf. We handle quotations, technical questions during the design phase, commissioning support and spare parts for customers across Germany, Switzerland and the wider European market.
A DENSO VS-6 running bin picking with the Eureka AI vision system is set up in our Düsseldorf showroom. Seeing the cycle on real parts answers questions that a datasheet cannot, particularly around pick rates and how the vision system handles your geometry. Contact us to arrange a visit, or send us your parts and we will test them for you.
Your contact person
North-East Germany, International
Your contact person
South Germany and Switzerland