Outstanding Speed: The Fastest Articulated Robots in Their Class
The new VS series comes equipped with exceptional performance and speed in a compact housing, contributing to the automation of assembly and transportation processes for smaller components. The various models stand out for their highest speed in their class, significantly enhancing productivity.
Specs
| Model | VS-050 | VS-060 |
| Arm Reach | 505 mm | 605 mm |
| Payload | 4 Kg | 4 Kg |
| Cycle Time | 0,35 sec | 0,35 sec |
| Repeatability | ± 0,02 mm | ± 0,02 mm |
| Model | VS-068 | VS-087 |
| Arm Reach | 710 mm | 905 mm |
| Payload | 7 Kg | 7 Kg |
| Cycle Time | 0,31 Sek. | 0,34 Sek. |
| Repeatability | ± 0,02 mm | ± 0,03 mm |
Highlights
Communication flange
17-wire signal cable + Ethernet port added to tip of flange (the sixth axis) (optional)
Install an electric hand and camera without breakages in cables
Bottom Connector
Saves space
Protect cables and connectors
Compact design
Small robot’s base installation area
Slim robot arm: width of 95mm
Flexible movement even in a small space
Global Service organization
Personal contact
Worldwide service
Low maintenance
Lifetime grease lubrication
Mounting Possibilities
Floor-mounted
Wall-mounted
Ceiling-mounted
Environmental resistance
A type resistant to adverse environmental conditions (rated IP67)
Use in the proximity of a processing machine for cutting water or powder
Accurate
Repeatability accuracy: ±0.02 mm
Consistency in production
Options
Signal lines / Air pipe
are embedded in the top of the second arm.
Communication Flange
connectors for electrical signal lines and EtherNet
wiring to be embedded in the robot unit.
Brake release unit
Brake release switch is directly connected to the brake release signal of each axis).
External battery unit
Encoder backup battery installed outside the robot.
Facilitates replacement of batteries and improves maintainability.
Second arm cover
Right- hand, with tapped holes
This cover has tapped holes to secure wires for the robot’s second arm.
Connector panel
Choose from two mounting orientations when connecting cables (motor & encoder cable, etc.) to the robot