EUREKA 3D Camera
Key features of the EUREKA 3D Camera AI-based stereo vision Point clouds are generated from stereo images with AI, without pattern projection or time-of-flight. Fixed or robot-mounted Mount the camera above the bin or on the robot wrist, depending on your application. One cable to the controller A single PoE cable carries both power and […]
EUREKA Controller
Key features of the EUREKA Controller Connects your camera, robot and PLC Cameras, robots and PLCs are integrated and calibrated through one controller. No-code software, pre-installed Set up and adjust applications with drag and drop, without writing code. Works with YAMAHA, DENSO and other major robot brands Use the controller with the robots already on […]
HIOKI Powder Impedance Measurement System
Typical Applications The Powder Impedance Measurement System supports electrical and mechanical evaluation of powder materials for advanced battery research and development. Solid-state Battery Materials Evaluate electrical and mechanical properties of solid electrolytes and other powder materials used in all-solid-state batteries. Dry-process Electrode Development Evaluate powder characteristics under pressure to support material selection and optimization for […]
HIOKI RM2610 Electrode Resistance Measurement System
Typical Applications The RM2610 supports quantitative electrode evaluation across lithium-ion battery research, process development, and quality control. Electrode Material Development Evaluate changes in electrode resistance caused by active materials, conductive additives, binders, and formulation conditions. Process Optimization Quantitatively compare electrode characteristics when optimizing mixing, coating, drying, and pressing conditions. Quality Control Use resistance parameters to […]
HIOKI Slurry Analytical System SA2634
Typical Applications Optimization of Mixing Conditions Compare mixing time and other process conditions to support optimization of slurry preparation. Material & Formulation Research Compare conductive additives, dispersants, materials, and formulations based on quantitative slurry characteristics. Slurry Screening Compare and screen slurry characteristics before electrode coating and cell assembly. Quality Evaluation Evaluate slurry variation and consistency […]
KES-QM Warm/Cool Feeling Measurement Tester
Typical Applications KES-QM is suitable for evaluating the warm and cool feeling of a wide range of materials and applications. Textiles Evaluate the surface characteristics of woven, knitted and nonwoven fabrics. Automotive Measure tactile properties of interior materials such as seat fabrics and trims. Research & Development Support objective material evaluation for product development and […]
SAYAKA PCB Routing Fixtures for PCB Depaneling
SAYAKA SAM-CT23NJ, SAM-CT34NJ and SAM-CT56NJ PCB Router Machines
SAYAKA SAM-CT23Q & SAM-CT23S Desktop PCB Router Machines
Kurimoto KRC Twin-Screw Continuous Kneader
HOW KRC WORKS Material Feeding Raw materials are continuously fed into the twin-screw kneading chamber. Continuous Kneading Twin screws provide intensive mixing and precise control of kneading conditions. Stable Discharge Uniformly kneaded material is continuously discharged for downstream processing. KEY BENEFITS Continuous Processing Continuous operation supports stable production and consistent material quality. Precise Process Control […]